Monday, January 4, 2010

FUCTINONS AUTOMOTIVE GLASS

Diposkan oleh pato blog

MATERIALS AND FUNCTIONS OF AUTOMOTIVE GLASS



The main function of glass inserted in a car driver and passengers that can clearly see the traffic conditions in front of and around the highway. In addition, the glass also serves as a protection for the driver and passengers of the various influences (entry) foreign objects, such as dust, sand, water, air, and also small animals such as termite and so on.
The glass is used in a different car with a lot of glass used for the purposes mobeler or other household items. glass for cars should be clearly visible, not easily transformed to the vision rider, and more importantly is to meet work safety standards.

GLASS TYPES
In general there are 2 (two) types of glass used in the manufacture of glass windshields (windscreens) and the rear view mirror of a car (automobile), namely:

a) Glass Laminates (Laminated Glass)
This type of glass consists of 2 (two) layers of glass and a layer of thin plastic (polyvinyl butiral PVB) In the manufacturing process, glass is laminated by way of heating and emphasis. With strong ties, it makes the plastic coating had been completely transparent. If this type of glass breaking would crack and break into small pieces, and layers of plastic to prevent the flying pieces of harmful fractions. Without the plastic layer in the middle, so the pieces can injure the driver and passengers. Type "laminated glass (laminated glass)" also called glass plywood.




b) Crystal Glass (Tempered Glass)
Crystal glass (Tempered glass) consists of a glass with a thick layer of about 1/4 inches. Type of glass is harder than laminated glass (laminated glass). This glass-making process is by heating the surface with a high temperature followed by air cooling. This process forms a hard outer layer that makes the glass is very strong and impact resistant.




In some types of Tempered glass, to protect the driver and still be able to view although the windscreen was broken or cracked, then in front of the driver (the driver) paired with a layer of security called a safety zone. Safety zone has a width of 400 mm and 150 mm with an elliptical shape. Type of glass is called an armor plate.
This picture shows the two types of windshield (automotive) in a state of broken or cracked.


                                                                                  

Tuesday, September 1, 2009

mechanical energy

Diposkan oleh pato blog


mechanical energy


kinetic energy and gravitational potential energy, including energy called mechanical energy. makanik energy is the amount of potential energy and kinetic energy possessed by an object, and is also the total energy. amount of mechanical energy of an object is always fixed, while the kinetic energy and potential energy can be changed-ubah.energi potential + kinetic energy.
formula: E = Em + Ek

example:
a body is at rest at a height of 80 cm, 5 kg of body mass, and acceleration of gravity g = 10 m/s(squared). determine the mechanical energy of the object.

resolution:
means it does not have the speed or v = 0, whereas the object height h = 80cm = 0.8 m.

then: Em = Ep + Ek = mgh + 1/2mv (squared) = 5.10.0,8 + 0 = 40 joules.

so, the mechanical energy of objects that dwell on the table will be equal to the potential energy, since kinetic energy is zero.

Monday, July 27, 2009

Cutlery

Diposkan oleh pato blog


Cutlery
Clipper work on the plate that is used is
scissors and saw. Scissors to cut the plate and saw
for memtong wire. Scissors have a bermacammacam
depending on its use are:
a. Straight scissors for cutting the straight
b. Scissors scissors sky covers the right, the left
and straight scissors. Dirganatara scissors are used to
cut curved shapes, a circle, the form does not
beraturn form and forwards. For example, to curvature direction
right, then used scissors to cut the right direction.
c. Curved scissors, scissors to cut this shape
curve.
d. Bulldog forceps, scissors are used to cut
straight form, is usually used to shear plate
a thick plate or stainless steel.
e. Scissors part-bird, which is used for cutting
circular with a diameter smaller.
f. A combination of scissors, used to cut the
straight and curved.
g. Ganda scissors, scissors have two pieces of
used to cut selebar 3 mm with the average results.
Scissors to make holes in the pipe umbrella.